Chassis Details
Stock Number
RH574483
Stock Type
New
Year
2024
Make
Model
Class
6
GVWR
22,500
Drivetrain
4WD
Wheelbase
165
Cab Type
Regular
Vehicle Trim
Work Truck
Vehicle VIN
1HTKJPVM4RH574483
Interior Color
Dark Ash seats with Jet Black interior accents
Exterior Color Description
Summit White
Engine Cylinder Count
8
Engine
Turbocharged Diesel V8 6.6L/402
Transmission Type
Automatic
Rear Wheels
Dual
Fuel Type
Diesel
Engine Model
L5D
Engine Size (L)
6.6
Brake Type
Hydraulic
Vehicle Options
- BATTERY TOP POST THREADED BATTERY JUMP START STUD (located on battery box)
- 30 000 LB. GCWR (13 607 KG)
- ALTERNATORS DUAL 150 AMPS AND 220 AMPS EACH
- TIRES REAR 225/70R19.5G TRACTION BLACKWALL PIRELLI Max Axle Load: 15 000 lb.
- SPARE TIRE DELETE (STD)
- DARK ASH SEATS WITH JET BLACK INTERIOR ACCENTS VINYL SEAT TRIM
- RUGGED DUTY SERVICE TRANSMISSION AUTOMATIC CLOSE-RATIO 6 SPD WITH DOUBLE OVERDRIVE ALLISON A2750RDS ratios: 3.10 1ST 1.80 2ND 1.40 3RD 1.00 4TH 0.70 5TH 0.61 6TH Rugged Duty Series includes park pawl
- LICENSE PLATE KIT FRONT
- GRILLE CHROME
- AUDIO SYSTEM 4.2 DIAGONAL COLOR DISPLAY AM/FM stereo with USB port and auxiliary jack (STD)
- BATTERIES HEAVY-DUTY DUAL 1300 COLD-CRANKING AMPS includes battery box mounted to left side under cab
- REMOTE KEYLESS ENTRY
- VOCATIONAL SPECIFIC HEAVY SUSPENSION PACKAGE Allows the selection of 7 000 lb. 8 000 lb. front axles and/or 15 500 lb. rear spring suspension on trucks that will be upfitted with the following vocational bodies: Utility/Service Bodies Aerial Lift/Bucket bodies Front Plow/Rear Spreader Applications and Landscape Dump Bodies.
- SHOCK ABSORBERS REAR
- WHEELBASE 165 (419.1 CM) 84 CA (STD)
- FRONT AXLE 7 500 LB. DANA SPICER 60-256 SINGLE-REDUCTION FRONT DRIVING
- RECOVERY HOOKS FRONT FRAME-MOUNTED BLACK
- TIRES FRONT 225/70R19.5G HIGHWAY BLACKWALL PIRELLI Max Axle Load: 7 940 lb. (STD)
- PAINT SCHEME STYLE 1
- MIRRORS OUTSIDE BLACK HEATED POWER-ADJUSTABLE HIGH-VISIBILITY VERTICAL CAMPER-STYLE AND LOWER CONVEX SPOTTER GLASS MANUAL-FOLDING. Convex glass is not heated and not power adjustable. 102 Wide Load
- LABEL INFORMATION CLEAN IDLE DOOR LOCATION
- GVWR 22 500 LB. (10 206 KG)
- BUMPER FRONT CHROME
- GLASS DEEP-TINTED
- SKID PLATE STEEL FRAME-MOUNTED PROTECTS THE TRANSFER CASE FROM THE GROUND
- ENGINE BLOCK HEATER
- WINDOWS POWER WITH DRIVER EXPRESS UP AND DOWN AND EXPRESS DOWN ON ALL OTHER WINDOWS
- ENGINE DURAMAX 6.6L TURBO-DIESEL V8 B20-DIESEL COMPATIBLE 350 hp @ 2500 rpm 750 lb.-ft. torque @ 1400 rpm (STD)
- REAR SUSPENSION 15 500 LB. (7 031 KG) MULTI-LEAF VARI-RATE
- ELECTRICAL PROVISIONS REAR OF FRAME UPFITTER BODY BUILDER WIRING includes Sealed Connectors for Tail/Amber Turn/Marker/Backup/Accessory Power/Ground and Sealed Connector for Stop/Turn
- SEATS FRONT 40/20/40 SPLIT-BENCH 3-PASSENGER driver and front passenger recline with outboard head restraints and center fold-down armrest with storage. Vinyl has fixed lumbar and cloth has manually adjustable driver lumbar. (STD)
- SUMMIT WHITE
- WORK TRUCK PREFERRED EQUIPMENT GROUP includes standard equipment
- AXLE LIMITED SLIP DANA SPICER TRUETRAC TORQUE PROPORTIONING LIMITED SLIP
- PAINT SOLID
- DPF DIESEL PARTICULATE FILTER MANUAL REGENERATION customer regeneration will not be allowed until the DPF load percentage has reached 100% full and a driver information center (DIC) message has been shown
- BACK-UP ALARM CALIBRATION This calibration will allow installation of an aftermarket back-up alarm by disabling rear perimeter lighting
- BACKUP ALARM (Includes (SFW) SEO Calibration for backup alarm.
- REAR AXLE 4.30 RATIO Max road speed: 75 MPH
- HORN DUAL-NOTE
- WHEELS 19.5 X 6.75 STEEL BLACK PAINTED 8-HOLES HUB PILOTED (STD)
- AUXILIARY HARNESS 3' FOR HEADLAMPS AND TURN SIGNALS
- PROVISION FOR CAB ROOF-MOUNTED LAMP/BEACON provides an overhead console mounted switch and electrical wiring tucked beneath the headliner for a body upfitter to connect a body-mounted warning or emergency lamp
- REAR AXLE 15 500 LB. (7 031 KG) DANA SPICER S16-140 SINGLE REDUCTION
- POWER TAKE OFF ENGINE CONTROL PROVISIONS Access is available on left-hand and right-hand side
- POWER OUTLET 110-VOLT AC
- 6500 HD SERIES
- Turbocharged
- Four Wheel Drive
- Power Steering
- ABS
- Steel Wheels
- Tires - Front All-Season
- Tires - Rear All-Season
- Running Boards/Side Steps
- AM/FM Stereo
- MP3 Capability
- Auxiliary Audio Input
- Split Bench Seat
- Vinyl Seats
- Adjustable Steering Wheel
- Power Door Locks
- Cruise Control
- A/C
- Traction Control
- Stability Control
- Traction Control
- Daytime Running Lights
- Automatic Headlights
- Driver Air Bag
- Passenger Air Bag
- Passenger Air Bag On/Off Switch
- Front Side Air Bag
- Front Head Air Bag
- Passenger Air Bag On/Off Switch
- Back-Up Camera
- View All
Body Details
Manufacturer
Body Type
Body Line
Fuel Lube Trucks
Body Model
KLT1
Air Compressor Manufacturer
VMAC
Air Compressor Type
Rotary Screw
Air Compressor Cubic Feet Per Minute (CFM)
30
Air Compressor Pounds Per Square Inch (PSI)
100
Body Material
Steel
Body Width
95.78"
Body Length
138"
Body Color
White
Compartment Description
Dual Roll Up Doors, Underbody and Above Body Storage Compartments on Each Side of the Body | Compartments Include Over Center Door Retainers for Elimination of Involuntary Swing
Hose Reel Description
50' x 1/2" Spring Rewind Hose Reel
Lighting Type
LED
Lighting Description
ICC Lights and Reflectors Included on Body | LED S/T/T, B/U, and Marker Lights | LED Compartment Lights in Hose Reel Compartment and Underbody Compartments | (4) Adjustable Work Lights | Strobes
Lighting Location
Exterior
Tank Description
1 Lube System -(3) 50 Gallon Fresh Oil Tanks | (1) 50 Gallon Coolant Tank | (1) 100 Gallon Used Oil Tank | 1 Grease System - 120 LB Grease Drum
Safety Equipment Description
First Aid Kit, Fire Extinguisher and Safety Triangles
Mud Flaps Description
Mud Flaps
Fuel Lube Trucks Features
Need a Lube Truck that has all the fluids, tools and equipment you need for your job? Knapheide Lube Trucks are modular, so it’s not a one size fits all approach. Customers can choose from a variety of product tank sizes and configurations as well as a fully enclosed or open design to best fit the environment they work in. Our KLT-5084 is specifically designed for 84″ CA chassis to provide big lube truck features in a smaller package. We can also custom design lube trucks for up to class 7 chassis.
Product is easily dispensed through a nozzle and retractable reel located within the rear reel compartment with a lightweight aluminum roll-up door. Halogen work lights provide visibility for the operator when working in low-light conditions.
If you need a flexible Lube Truck to keep the equipment up and running to its full potential, choose the Knapheide KLT
Body Installed by
Knapheide
510 Thorpe Rd
Orlando, FL 32824
Disclaimer:
Recently installed dealer equipment may not be reflected in the price above. We also offer a range of conversion vehicles that have been extensively upfitted after they have left the factory. Occasionally, the original factory invoice and MSRP information will override the updated information on these vehicles, creating an error in pricing. We always recommend you call us to confirm pricing and availability if you are interested in a particular vehicle. The listed prices do not include additional fees and cost of closing, such as government fees and taxes, any finance charges, any dealer documentation fees (if applicable on vehicles for personal use), any emissions testing fees or any other fees.
*** Vehicle information is provided by the seller or its agent; Comvoy.com is not responsible for the accuracy of said information. Please verify before purchasing.
