Vehicle Notes
2024 Chevrolet 5500 HG LCF Gas
Chassis Details
Stock Number
500146
Stock Type
New
Year
2024
Make
Model
Class
5
GVWR
17,950
Drive Train
RWD
Cab Type
Crew
Vehicle Trim
NA
Vehicle VIN
54DEEJ1D1RS500146
Interior Color
Medium Ash Gray, Cloth seat trim
Seating Capacity
7
Exterior Color Description
Arc White
Engine Cylinder Count
8
Engine
Engine, Gas, 8 Cyl, 6.6L
Transmission Type
Automatic
Fuel Type
Gasoline
Engine Model
L8T
Engine Size (L)
6.6
Horsepower
350
Brake Type
Hydraulic
Vehicle Options
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Steering wheel, urethane
- Drivetrain, rear-wheel drive
- Floor mats
- Grille, Silver
- Windows, power
- Tires, rear, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- Wheels, 19.5" x 6", K steel (STD)
- Exhaust, single outlet
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Daytime Running Lamps
- Mirror, outside left-hand and right-hand with integral convex mirrors
- Cruise control, electronic, automatic
- Transmission, Allison 1000 RDS 6-speed automatic, PTO not available (STD)
- Audio system feature, 2 speakers
- Rear suspension, 14,550 lbs. (6600 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Vehicle Application Truck
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- LED Headlamps
- Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
- Assist steps
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- GVWR, 17,950 lbs. (8142 kg)
- Tires, front, 225/70R19.5 G
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Storage, door pockets
- Storage, seatback pockets
- Driver Information Center
- Glass, tinted
- Door locks, power
- Brakes, 4-wheel antilock, front and rear disc
- Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering, with an 18.8-20.9:1 gear ratio
- Seat, front high back bucket driver and passenger tricot cloth covered reclining high back driver seat with single two-occupant fold down passenger seat (STD)
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Rear axle, 5.37 ratio
- Wheelbase, 176" (447.0 cm)
- Air conditioning, single-zone manual, integral in-dash mounted
- Emissions, 50 state certification
- Incomplete vehicle certification
- PIO, Rear Vision Camera
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- PIO, Back-up alarm
- Seat, front high back bucket driver and passenger
- PIO, Remote Keyless Entry
- Transmission, Allison 1000 RDS 6-speed automatic, PTO not available
- Ocean Freight Surcharge
- Medium Ash Gray, Cloth seat trim
- Wheels, 19.5" x 6", K steel
- Arc White
- Preferred Equipment Group
- PIO, Audio System, Enhanced audio system
- TIRES, FRONT, 225/70R19.5
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- FLEET
- View All
Body Details
Manufacturer
Body Type
Body Line
Standard Contractor Body
Body Model
HTCO19296
Body Material
Steel
Body Width
96"
Body Length
16'
Body Color
White
Bulkhead Type
Tapered
Bulkhead Material
Steel
Bulkhead Height
42"
Floor Description
Diamond Plate
Floor Material
Steel
Hitch Type
Receiver
Hitch Class
V
Bumper Description
Stainless Cover on Rear Dock Bumper
Camera Description
Backup Camera
Side Description
Fold Down Wood Gates
Standard Contractor Body Features
Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!
- Standard Features:
- Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
- Top deck mounted boxes, addressing a wide variety of storage needs.
- Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
- Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
- Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.
Body Installed by
Harbor
255 Voyager Ave
Brea, CA 92821
Disclaimer:
Displayed price does not reflect fleet incentives please contact dealer for actual details, pricing and body warranty info. Prices do not include Tax, Title, License, P&H or Documentary Fee
*** Vehicle information is provided by the seller or its agent; Comvoy.com is not responsible for the accuracy of said information. Please verify before purchasing.
